ATxmega128a1 USB Development Board
MT-X1





This page is no longer updated. Please see http://www.mattairtech.com/index.php/development-boards/mt-x1s.html



Hex Files for MT-X1

 BootloaderDFU.hex  Revision 110523
 MT_X1.hex  Revision 110523
 MT_X1.eep  Revision 110523
 XMEGA_Demo.hex  Revision 110617


The BootloaderDFU.hex file is the bootloader that comes pre-installed on the USB AVR.

The MT_X1.hex file contains the AVRISPmkII compatible PDI programmer, serial bridge,
and configuration that comes pre-installed on the USB AVR


The MT_X1.eep file contains the default configuration that comes pre-installed on the USB AVR

The XMEGA_Demo.hex file demonstrates the onboard peripheral devices and sleep mode.
It is pre-installed on the XMEGA and utilizes the serial bridge to communicate with a terminal emulator.


Copyright (c) 2009-2011, Justin Mattair
Copyright (c) 2009-2011, Dean Camera
Copyright (c) 2003-2011, Atmel Corporation
Copyright (c) 2009, CHaN
Copyright (c) 2010, Peter Kwan




Source code

  MT-X1_110617.zip  Revision 110617

This file contains all of the source code for the project.


Copyright (c) 2009-2011, Justin Mattair
Copyright (c) 2009-2011, Dean Camera
Copyright (c) 2003-2011, Atmel Corporation
Copyright (c) 2009, CHaN
Copyright (c) 2010, Peter Kwan




Drivers

   MT_X1.inf

An .inf file is required for the serial bridge, configuration, and XMEGA demo program if running Windows, when it will operate as a CDC-ACM device (virtual COM port). This file supports Windows 2000, XP, Vista (32 and 64 bit) and Windows 7 (32 and 64 bit). Linux does not require a download (drivers should already be installed).

The AVRISPmkII compatible PDI programmer requires a driver provided by Atmel as a part of AVR Studio (see manual).

The DFU Bootloader also requires a driver. This driver is included with FLIP (inside the USB folder of FLIP's directory).
If using Windows Vista 64-bit or Windows 7 64-bit, you may need to download signed drivers from http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_type=project&item_id=2196. The latest version of FLIP should not require this.




License / Disclaimer

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both that the copyright notices and this permission notice and warranty disclaimer appear in supporting documentation, and that the name of the authors not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.

The author disclaim all warranties with regard to this software, including all implied warranties of merchantability and fitness. In no event shall the author be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an action of contract, negligence or other tortious action, arising out of or in connection with the use or performance of this software.



Last update: June 2, 2011